M122-DS Intercooled Kit
This kit locates the intake on the Drivers Side
using a '07-12 GT500 M122 supercharger
$3279.95 + shipping
LAYAWAY and FINANCING Options Available
Please Call 513-697-0060 to Order.
............................................................................................................................................................
The M122-DS kit is primarily designed for those cars/trucks that have their intake path going down the drivers side, hence our kit name ending in "DS". Using the excellent 122 cubic inch supercharger from a 2007-2012 GT500 makes installing a supercharger on your Crown Vic, Grand Marquis, Town Car, F150, etc. easier than using our Terminator GT which has the intake path on the passenger side. Our M122-DS kit makes your like easy when you wish to install a positive displacement supercharger that makes GOBS of low end torque! This is truly the best kit out there for the 4.6L 2V....bar none!!
When using a factory GT 500 supercharger, this kit will safely make 380-400 RWHP on a bone stock 4.6L 2V engine at approximately 7-8# of boost. Higher power levels are easily capable with built engines and different pulleys to raise boost. The Tork Tech M122-DS kit allows our customers to make significantly higher power levels by simply installing any aftermarket supercharger intended for the '07-12 GT500 application! Yes, our kits will support blowers from Whipple, VMP and K. Bell to make HUGE POWER!!
The GT500s throttle body uses a Drive-By-Wire setup and has the same electrical plug as the late model Panther platform cars and others that were DBW. This kit is adaptable to a cable driven throttle body as well. We offer an adapter to mate a '03/04 Cobra throttle body to the GT500 inlet plenum and also offer a remote mount Idle Air Bypass Valve adapter to recreate this necessary function on the M122 supercharger. These two items are optional and pictures are shown below.
............................................................................................................................................................
The M122-DS kit is primarily designed for those cars/trucks that have their intake path going down the drivers side, hence our kit name ending in "DS". Using the excellent 122 cubic inch supercharger from a 2007-2012 GT500 makes installing a supercharger on your Crown Vic, Grand Marquis, Town Car, F150, etc. easier than using our Terminator GT which has the intake path on the passenger side. Our M122-DS kit makes your like easy when you wish to install a positive displacement supercharger that makes GOBS of low end torque! This is truly the best kit out there for the 4.6L 2V....bar none!!
When using a factory GT 500 supercharger, this kit will safely make 380-400 RWHP on a bone stock 4.6L 2V engine at approximately 7-8# of boost. Higher power levels are easily capable with built engines and different pulleys to raise boost. The Tork Tech M122-DS kit allows our customers to make significantly higher power levels by simply installing any aftermarket supercharger intended for the '07-12 GT500 application! Yes, our kits will support blowers from Whipple, VMP and K. Bell to make HUGE POWER!!
The GT500s throttle body uses a Drive-By-Wire setup and has the same electrical plug as the late model Panther platform cars and others that were DBW. This kit is adaptable to a cable driven throttle body as well. We offer an adapter to mate a '03/04 Cobra throttle body to the GT500 inlet plenum and also offer a remote mount Idle Air Bypass Valve adapter to recreate this necessary function on the M122 supercharger. These two items are optional and pictures are shown below.
............................................................................................................................................................
............................................................................................................................................................
The Intercooled M122-DS Kit includes the following:
Installation is straight-forward and can be completed by a DIY enthusiast with common hand tools. Our online Installation Instructions are shown on the left side of the main page.
Optional:
NOTE, if you currently have one of our Terminator GT kits but wish to upgrade to a M112-DS kit we offer all the unique parts in a separate Termi M112 to M122-DS conversion kit.
............................................................................................................................................................
NOTE: For a detailed look at what items the customer will need to purchase in order to complete this kit please look at our Frequently Asked Question #1....SEE THIS LINK.
This is a very important and informative link so virtually everyone interested in this kit should definitely review our FAQ #1 in great detail!!
The Intercooled M122-DS Kit includes the following:
- Aluminum lower intake manifold with remote coolant thermostat housing.
- High capacity intercooler resides inside the lower manifold directly below the customer provided GT500 Supercharger.
- Front engine cross brace assembly that provides an independent 8-rib supercharger drive assembly with all belt idler pulleys and a tensioner.
- 7" diameter lower piggy back style crank pulley that attaches to the factory Romeo style pulley dampener to complete the separate 8-rib drive belt assembly.
- 3.0" diameter custom hub and ring style 8-rib supercharger pulley. Optional 2.75" diameter.
- Custom gasket between the customer provided supercharger and the top plate.
Installation is straight-forward and can be completed by a DIY enthusiast with common hand tools. Our online Installation Instructions are shown on the left side of the main page.
Optional:
- Throttle Body Adapter - for use of a '03/04 Cobra Tbody on the M122 inlet elbow. This is for cable driven throttles, not Drive-By-Wire.
- Remote mount Idle Air Control Valve - for use with the Throttle Body Adapter to complete an IAC setup on cable driven throttles, not Drive-By-Wire.
NOTE, if you currently have one of our Terminator GT kits but wish to upgrade to a M112-DS kit we offer all the unique parts in a separate Termi M112 to M122-DS conversion kit.
............................................................................................................................................................
NOTE: For a detailed look at what items the customer will need to purchase in order to complete this kit please look at our Frequently Asked Question #1....SEE THIS LINK.
This is a very important and informative link so virtually everyone interested in this kit should definitely review our FAQ #1 in great detail!!
